Where the energy
reaches
6.78MHz and 2MHz are combined to divide the treatment depth into three levels.
Whereas single-frequency radiofrequency works mainly in the dermis, XERF adds a 2MHz wavelength to deliver energy to deeper layers.
Depth is divided into three levels — shallow, middle and deep — output into ten steps, and the tip surface temperature is monitored in real time.
We suggest it for
A useful approach when several concerns overlap in one area.
Even one area has several layers of depth
Even on the same cheek, loss of dermal firmness and deep-layer sagging must be handled differently.
Within one face, shallow, middle and deep layers are distinguished by area.
The tip surface temperature is watched in real time during delivery to avoid an excessive rise.
Only as much as needed is used, and areas sensitive to pain are handled differently.
Procedure details
※ The information above is a general guide; the actual scope and course may differ with your skin condition, the area and your procedure history.
Every procedure is decided after a consultation with a specialist.
The process
The specialist checks skin thickness and the degree of sagging, then decides the scope.
The method and timing of anaesthesia are divided by area and intensity.
The specialist carries out the procedure at the planned depth and output.
We explain soothing care and home care, then review the change with you afterwards.
Frequently asked questions
XERF adds 2MHz to 6.78MHz to reach deeper layers, applying the depth in three levels.
It may be possible depending on the area and the intensity.
We decide after checking your pain sensitivity at the consultation.
Most people return to daily life on the day of the procedure.
Light redness settles naturally.
Rather than pushing the deep-layer output, we check the volume of the face first and then decide the depth.